Class Locations

This course consists of 159 classroom hours covering the following areas: Excavations; Underground Pipe Installations; Rigging Equipment; Rigging Practices; Standards & Specifications; Advanced Trade Math; Motorized Equipment II; Introduction to Aboveground Pipe Installations; Field Routing & Vessel Trim; Pipe Hangers & Supports; Testing Pipe Systems & Equipment; Advanced Blueprint Reading; Stress Relieving & Aligning; Maintaining Valves; Introduction to Supervisory Roles.

September 6, 2023 – May 2024
5:30 – 8:30 PM – Mondays & Wednesdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 159 classroom hours covering the following areas: Basic Safety; Introduction to Construction Math; Introduction to Hand Tools; Introduction to Power Tools; Introduction to Construction Drawings; Basic Rigging; Basic Communication Skills; Basic Employability Skills; Introduction to Materials Handling; Orientation to the Trade; Introduction to Components and Systems; Steel Pipe; CPVC Pipe and Fittings; Copper Tube Systems; Underground Pipe.

September 5, 2023 – May 2024
5:30 – 8:30 PM – Tuesdays & Thursdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 159 classroom hours covering the following areas: Deluge Preaction Systems; Standpipes; Water Supplies; Fire Pumps; Application-Specific Sprinklers and Nozzles.

September 6, 2023 – May 2024

5:30 – 8:30pm – Mondays & Wednesdays 

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 159 classroom hours covering the following areas: Introduction to Sheet Metal; Basic Safety; Introduction to Hand Tools; Introduction to Power Tools; Introduction to B.G.L. c 112 s 237-251 and 271 CMR; Basic Rigging; Introduction to Materials Handling; Basic Communication Skills; Basic Employability Skills; Introduction to Construction Math; Introduction to Construction Drawings; Tools of the Trade; Installation of Ductwork.

September 5, 2023 – May 2024 – 5:30 – 8:30 PM
Mondays & Wednesdays OR Tuesdays & Thursdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 159 classroom hours covering the following areas: Safety Review; Trade Math 104; Shop Production and Organization; Installation of Air Distribution Accessories; Air Systems; Duct Fabrication Standards; Introduction to Layout; Fabrication I – Parallel Line Development; Fabrication II – Radial Line Development; and Hands-on Shop Fabrication.

September 5, 2023 – May 2024
5:30 PM – 8:30 PM Mondays & Wednesdays OR Tuesdays & Thursdays 

ABC Member: $2,089.00 / Not Yet A Member: $2,476.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,914.00 / Not Yet A Member: $2,301.00

** This will be a hands-on training course. The extra cost is for materials.

This course consists of 159 classroom hours covering the following areas: Trade Math II; Introduction to Supervisory Skills; Air Properties and Distribution; Principles of Airflow; Air Testing and Balancing; Fabrication III – Triangulation; Plans and Specifications; and Hands-on Shop Fabrication.

September 6, 2023 – May 2024
5:30 – 8:30 PM Mondays & Wednesdays 

ABC Member: $2,089.00 / Not Yet A Member: $2,476.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,914.00 / Not Yet A Member: $2,301.00

** This will be a hands-on training course. The extra cost is for materials.

This course consists of 159 classroom hours covering the following areas: Massachusetts Uniform Sheet Metal Code; Trade Math III – Field Measuring; Comprehensive Plan and Specification Reading; Soldering; Architectural Sheet Metal; Louvers, Dampers and Access Doors; Fabrication IV – Comprehensive Review; and Hands-on Shop Fabrication.

September 5, 2023 – May 2024
5:30 – 8:30 PM Tuesdays & Thursdays

ABC Member: $2,089.00 / Not Yet A Member: $2,476.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,914.00 / Not Yet A Member: $2,301.00

** This will be a hands-on training course. The extra cost is for materials.

This course consists of 120 classroom hours covering the following areas: Fasteners, Hardware, and Wiring Terminations; Control Circuit and Motor Troubleshooting; Troubleshooting Cooling; Troubleshooting Heat Pumps; Troubleshooting Gas Heating; Troubleshooting Oil Heating; Troubleshooting Accessories; Zoning Ductless, and Variable Refrigerant Flow Systems; Commercial Hydronic Systems; Steam Systems; Retail Refrigeration System; Customer Relations.

September 5, 2023 – May 2024
5:30 – 8:30 PM – Tuesdays & Thursdays

ABC Member: $1,405.00 / Not Yet A Member: $1,864.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,230.00 / Not Yet A Member: $1,689.00

This course consists of 160 classroom hours covering the following areas: Load Calculations –Feeders and Services; Health Care Facilities; Standby and Emergency Systems; Basic Electronic Theory; Fire Alarm Systems; Specialty Transformers; Advanced Controls; HVAC Controls; Heat Tracing and Freeze Protection; Motor Operation and Maintenance; Medium-Voltage Terminations/Splices; Special Locations; Fundamentals of Crew Leadership. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 11, 2023 – May 2024
4:00 – 8:00 PM – Mondays

ABC Member: $2,089.00 / Not Yet A Member: $2,476.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,914.00 / Not Yet A Member: $2,301.00

This course consists of 160 classroom hours covering the following areas: Load Calculations – Branch and Feeder Circuits; Conductor Selection and Calculations; Practical Applications of Lighting; Hazardous Locations; Overcurrent Protection; Distribution Equipment; Transformers; Commercial Electrical Services; Motor Calculations; Voice, Data, and Video; Motor Controls. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 6, 2023 – May 2024
4:00 PM – 8:00 PM – Wednesdays

ABC Member: $2,089.00 / Not Yet A Member: $2,476.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,914.00 / Not Yet A Member: $2,301.00

This course consists of 160 classroom hours covering the following areas: Alternating Current; Motors: Theory and Application; Electric Lighting; Conduit Bending; Pull and Junction Boxes; Conductor Installations; Cable Tray; Conductor Terminations and Splices; Grounding and Bonding; Circuit Breakers and Fuses; Control Systems and Fundamental Concepts. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 5, 2023 – May 2024
4:00 PM – 8:00 PM – Tuesdays

ABC Member: $2,089.00 / Not Yet A Member: $2,476.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,914.00 / Not Yet A Member: $2,301.00

This course consists of 160 classroom hours covering the following areas: Basic Safety; Introduction to Construction Math; Introduction to Hand Tools; Introduction to Power Tools; Introduction to Construction Drawings; Basic Rigging; Basic Communication Skills; Basic Employability Skills; Introduction to Materials Handling; Orientation to the Electrical Trade; Electrical Safety; Introduction to Electrical Circuits; Electrical Theory; Introduction to the National Electrical Code (NEC); Device Boxes; Hand Bending; Raceways and Fittings; Conductors and Cables; Basic Electrical Construction Drawings; Residential Electrical Services; Electrical Test Equipment. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 7, 2023 – May 2024
4:00 – 8:00 PM – Thursdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 159 classroom hours covering the following areas: Site Layout One: Differential Leveling; Site Layout Two: Angular Distance and Measurement; Advanced Roof Systems; Advanced Wall Systems; Advanced Stair Systems; Introduction to Construction Equipment; Introduction to Oxyfuel Cutting and Arc Welding; Site Preparation; Fundamentals of Crew Leadership. 

September 6, 2023 – May 2024
5:00 – 8:00 PM Mondays & Wednesdays

ABC Member: $2,089.00 / Not Yet A Member: $2,476.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,914.00 / Not Yet A Member: $2,301.00

** This will be a hands-on training course. The extra cost is for materials.

This course consists of 159 classroom hours covering the following areas: Excavations; Underground Pipe Installations; Rigging Equipment; Rigging Practices; Standards & Specifications; Advanced Trade Math; Motorized Equipment II; Introduction to Aboveground Pipe Installations; Field Routing & Vessel Trim; Pipe Hangers & Supports; Testing Pipe Systems & Equipment; Advanced Blueprint Reading; Stress Relieving & Aligning; Maintaining Valves; Introduction to Supervisory Roles.

September 6, 2023 – May 2024
5:30 – 8:30 PM – Mondays & Wednesdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

An online, at-your-own-pace course, powered by Penn Foster.

Course Commitment: $149.00

This math program covers the principles of business and industrial math, from basic operations like addition and multiplication through formulas and algebra. Upon finishing the 6 lessons in the program students will understand key concepts including fractions, proportions and the metric system.

An online, at-your-own-pace course, powered by Penn Foster.

Course Commitment: $229.00

An online, at-your-own-pace course, powered by Penn Foster.

Course Commitment: $369.00 / 22 hours

Bookkeepers are important to an organization’s group of financial record keepers. Bookkeepers compute, classify, record, and verify numerical data to maintain a company’s financial records. Learn the basics of bookkeeping and the roles of a bookkeeper. As a successful bookkeeper, you’ll contribute greatly to large and small businesses, and you’ll use your bookkeeping skills in your own financial matters.

An online, at-your-own-pace course, powered by Penn Foster.

Course Commitment: $179.00

Career Readiness Bootcamp consists of 10 lessons and is focused on helping you sharpen nine soft skills employers value. This program is designed to keep you moving forward with fun and engaging curriculum.

Key skills covered:

• Integrity
• Professionalism
• Respect
• Communication
• Teamwork
• Planning & Organizing
• Decision Making & Problem Solving
• Customer Focus
• Working with Tools & Technology

An online, at-your-own-pace course, powered by Penn Foster.

Course Commitment: $629.00 / 135 hours

Accredited Individual College Course – Students will learn about PC applications in word processing, spreadsheets, and presentation software, as well as create documents, spreadsheets, and presentations. Students will also learn how to integrate the applications.

An online, at-your-own-pace course, powered by Penn Foster.

Course Commitment: $369.00 / 61 hours

• Learn about the digital tools applicable to office and online environments.
• Explore the functions of Microsoft® Word™, Excel®, and PowerPoint®, as well as their practical applications.
• Learn the use and management of social media in a business environment, including such marketing strategies as branding, promotions, SEO, analytics, and positive, appropriate communication.
• Study the tools that are available to assist with web-based collaboration.

An online, at-your-own-pace course, powered by Penn Foster.

Course Commitment: $629.00 / 135 hours

Accredited Individual College Course – This course will provide students with a basic understanding of the principles of Financial Accounting. 

Topics covered include:

• Analyzing Transactions
• Completing the Accounting Cycle
• Merchandising Businesses
• Inventories, Assets, and Liabilities
• Corporations, Stocks, Bonds, and Cash Flow

An online, at-your-own-pace course, powered by Penn Foster.

Course Commitment: $769.00 / 241 hours

Program Goal:

To provide students with a clear understanding of leadership and management responsibilities and the opportunity
to practice the broad range of skills required of a Frontline Supervisor. This program is designed to support the
development of a student with strong industry knowledge and experience into a top-performing leader.

• Develop communication, leadership, and performance management skills.
• Develop organizational skills, customer service skills, and the ability to measure results.
• Develop the mindset and problem-solving skills to overcome obstacles and use conflict to stimulate growth.
• Identify and implement the best practices to be implemented for efficient and safe manufacturing.
• Define the roles and responsibilities of Production Supervisor, Warehouse Supervisor, and Maintenance Supervisor.

An online, at-your-own-pace course, powered by Penn Foster/Penn Foster High School.

Course Commitment: $1,189.00 / 6 Months

Your online high school diploma program consists of 16 core credits and you choose 5 elective credits, ranging from academic electives like American literature and algebra to career pathway electives, like a pharmacy technician, residential electrician, or vet assistant. The core curriculum is made up of English, math, social studies, science, arts and humanities, and health and physical education classes. 

Whether you’re a high school-aged student looking to finish your diploma online, a parent looking into at-home learning options for their student, or an adult who didn’t have the opportunity to earn their diploma, Penn Foster High School (through Gould Construction Institute) can help! Through flexible, online classes, you can earn your accredited high school diploma¹ on your schedule, from home.  

An online, at-your-own-pace course, powered by Gould Construction Institute.

Course Commitment: $59.00 / 3 hours

1. Goals of Training – As a result of taking this class, participants will be able to
   • Understand the principles of Hot Work.
   • Explain the types of activities that are classified as Hot Work.
   • Explain how to keep a Hot Work site safe.
2. Objectives of Training – As a result of taking this class, participants will be able to
   • Identify relevant standards, regulations, and ordinances that are applicable to Hot Work.
   • Describe the different forms of Hot Work.
   • Describe the four-step protocol for Hot Work Safety.
   • Define Hot Work hazards.
   • Explain Hot Work safety team roles and responsibilities.
   • Describe Hot Work permit requirements.
   • Read and Understand a Hot Work Permit.
3. Essential Questions – At the conclusion of the training, participants will be able to answer
   • What is Hot Work?
   • What are the roles of a safety team at a Hot Work site?
   • What are the responsibilities of a safety team at a Hot Work site?
   • What is the difference between the different Hot Work Sites?
   • Who is tasked with issuing Hot Work permits.

An online, at-your-own-pace course, powered by Penn Foster.

Course Commitment: $369.00 / 40 hours

Secure your company’s future by ensuring safety standards are up to par with state law. Offer Penn Foster’s industrial safety training programs to all employees, including electrical workers, machine tool operators, laboratory personnel, and anyone handling hazardous chemicals or materials; equips your organization with learned associates.

An online, at-your-own-pace course, powered by Penn Foster.

Course Commitment: $149.00

This course introduces you to the various domains of the construction industry: carpentry, HVAC, plumbing, roofing, drywall work, general maintenance, and so on. You’ll learn the differences between construction and building trades and residential and commercial construction. The duties and tasks of the construction and building trades professional are also explained in this course. Finally, you’ll learn about the proper safety measures required in various areas of the construction industry. Securing a safe environment is crucial to ensuring individual workers’ safety.

By the end of this course, you’ll be able to do the following:

• Analyze the structure of work, safety measures, and fundamentals of the construction industry and building trades.

This non-degree online course is offered in partnership between Gould Construction Institute and Wentworth Institute of Technology.

Introduction to Project Management at Wentworth Institute of Technology is designed to give you the fundamentals of Project Management as it applies to industries within the built environment, including but not limited to, leading construction, electrical, engineering, and architecture projects. Through seven interactive online modules, you will gain the tools to plan, implement, and manage projects during the entire life cycle.

What you learn:
• Introduction to Project Management
• Phases of Project Management
• Project Planning, Budgets, and Risks
• Project Teamwork
• Project Monitoring and Control
• Project Close-out
• Project Presentations

Format:
Online | Self-Paced | Interactive
Students complete a sequence of online modules at their own pace, as their schedule permits. Each module may include assigned readings or media, online quizzes, discussion boards, and more. The instructor will guide you through the course, provide feedback, and assessments of your learning.

Time Commitment:
7-Weeks | 35 Hours
You can expect to commit up to approximately five (5) hours per week on readings, exercises, and assignments.

Credentials Awarded:
Upon completion of the course, you will earn 3.5 Continuing Education Units (CEUs) and a Wentworth verified digital credential/certificate of completion to showcase on their resume and online channels.

Instructor:
Cindy Stevens, Ph.D., Professor, Business Management, School of Management

Member Tuition & Enrollment:
$799 – ABC Member Tuition
$999 – Not-Yet a Member Tuition

Applications are being accepted continuously through April 2023. Learn more and enroll now via the Gould Construction Institute HERE.

View the course flyer here: Introduction to Project Management – ABC Member Flyer 2023.

Note: ABC Member discounts will automatically be applied at checkout. Attendees MUST register with ABC Member company information to redeem this discount.

Not an ABC Member? Learn more about how joining ABC could benefit your company here or contact Venus Williams, ABC MA’s Membership Director: venus@abcma.org

An online, at-your-own-pace course, powered by Penn Foster.

Course Commitment: $629.00 / 135 hours

Accredited Individual College Course – This course familiarizes the student with both the business environment and the manager’s role within it. It covers decision-making, planning, organizing, leading, and controlling, as well as developing an ethical perspective.

An online, at-your-own-pace course, powered by Penn Foster.

Course Commitment: $499.00 / 153 hours

Our Starting Your Own Business curriculum consists of lessons in owning and operating an online business, understanding contract work, marketing, managing time effectively, and more to help you succeed as a business owner.

Program Goal:

To provide students with the skills necessary to start an online business, obtain clients, and build their business by providing a strong background in business practices, independent contractors, and management skills.

• Develop the skills necessary to start your own online business
• Demonstrate proficiency with a variety of computer and web‐based business applications
• Identify methods of individual and business marketing using the web and traditional means
• Develop effective strategies for building and managing a successful freelance career
• Discuss the elements, variables, and lifecycle of a contract and the roles and responsibilities of the signatories
• Describe how to use online and traditional job search tools and resources to locate and secure work

An online, at-your-own-pace course, powered by Penn Foster.

Course Commitment: $369.00 / 46 hours

An introductory course to prepare students for leadership/supervisory roles in workplace/jobsite environments.

Topics Covered:

• Supervision and Leadership (6 hours)
• Communication for Supervisors (9 hours)
• Leadership and Interpersonal Skills for Supervisors (10 hours)
• Personnel and Performance Management for Supervisors (12 hours)
• Team Building for Supervisors (9 hours)

An online, at-your-own-pace course, powered by Penn Foster.

Course Commitment: $539.00 / 241 hours

Program Goal:

To provide students with a clear understanding of leadership and management responsibilities in an industrial workplace. This certificate program is designed to support the development of a student with strong industry knowledge and experience into a top-performing leader.

Upon completion of the program, students will be able to:

• Define the necessary skills for supervision and leadership.
• Develop communication, leadership, and performance management skills to direct a successful team.
• Develop organizational skills, customer service skills, and the ability to measure results.
• Develop the mindset and problem-solving skills to overcome obstacles and use conflict to stimulate growth.
• Identify and implement the best practices to be implemented for efficient and safe manufacturing.

Tuesday November 17, 2020

5:00 PM – 8:00 PM

Member Price: $113.00 // Not-Yet-A-Member Price: $185.00

October 23, 30, November 6, & 13, 2020 – Fridays

8:30AM-4:00PM

Member Price: $656.00 // Not-Yet-A-Member Price: $764.00

This course consists of 159 classroom hours covering the following areas: Safety Review; Trade Math 104; Shop Production and Organization; Installation of Air Distribution Accessories; Air Systems; Duct Fabrication Standards; Introduction to Layout; Fabrication I – Parallel Line Development; Fabrication II – Radial Line Development; and Hands-on Shop Fabrication.

September 6, 2023 – May 2024
5:30 PM – 8:30 PM Mondays & Wednesdays

ABC Member: $2,089.00 / Not Yet A Member: $2,476.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,914.00 / Not Yet A Member: $2,301.00

** This will be a hands-on training course. The extra cost is for materials.

Though this course is held in New Hampshire, the curriculum is for a Massachusetts Journeyman License.

This course consists of 159 classroom hours covering the following areas: Introduction to Sheet Metal; Basic Safety; Introduction to Hand Tools; Introduction to Power Tools; Introduction to B.G.L. c 112 s 237-251 and 271 CMR; Basic Rigging; Introduction to Materials Handling; Basic Communication Skills; Basic Employability Skills; Introduction to Construction Math; Introduction to Construction Drawings; Tools of the Trade; Installation of Ductwork.

September 5, 2023 – May 2024
5:30 – 8:30PM ~ Tuesdays & Thursdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This 159 hours Certified Program as per requirements contained in “237 CMR 22.02: Required Electrical Education as a Prerequisite for Master Electrician Examination” will focus the attention of the Eligible Candidate to the current testing edition of the National Electrical Code (NFPA 70-2020) with particular attention also given to the Commonwealth of Massachusetts Electrical Code Amendments (527 CMR 12:00) as contained in the current edition of the National Electrical Code (NFPA 70-2020) and other required documents and information required to sit for the test.

This course is intended to supplement the continuing studies of the serious Eligible Candidate, with emphasis on assisting the Eligible Candidate to pass the desired Commonwealth of Massachusetts, Certificate A (Master) Electrician License Examination. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 6, 2023 – May 2024
5:30 PM – 8:30 PM – Mondays & Wednesdays
Tuition Price: $1,895.00 + $265.00 optional book fee

This course consists of 159 classroom hours covering the following areas: Trade Math – Estimating; Fume Exhaust Design; Introduction to Welding, Brazing and Cutting; Advanced Architectural Sheet Metal; Hands-on Shop Fabrication; and Exam Review and Preparation.

September 6, 2023 – May 2024
6:00 – 9:00 PM // Mondays & Wednesdays

ABC Member: $2,089.00 / Not Yet A Member: $2,476.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,914.00 / Not Yet A Member: $2,301.00

** This will be a hands-on training course. The extra cost is for materials.

This course consists of 159 classroom hours covering the following areas: Load Calculations – Branch and Feeder Circuits; Conductor Selection and Calculations; Practical Applications of Lighting; Hazardous Locations; Overcurrent Protection; Distribution Equipment; Transformers; Commercial Electrical Services; Motor Calculations; Voice, Data, and Video; Motor Controls. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 6, 2023 – May 2024
5:30 PM – 8:30 PM – Mondays & Wednesdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 159 classroom hours covering the following areas: Load Calculations –Feeders and Services; Health Care Facilities; Standby and Emergency Systems; Basic Electronic Theory; Fire Alarm Systems; Specialty Transformers; Advanced Controls; HVAC Controls; Heat Tracing and Freeze Protection; Motor Operation and Maintenance; Medium-Voltage Terminations/Splices; Special Locations; Fundamentals of Crew Leadership. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 6, 2023 – May 2024
5:30 – 8:30 PM – Mondays & Wednesdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 159 classroom hours covering the following areas: Alternating Current; Motors: Theory and Application; Electric Lighting; Conduit Bending; Pull and Junction Boxes; Conductor Installations; Cable Tray; Conductor Terminations and Splices; Grounding and Bonding; Circuit Breakers and Fuses; Control Systems and Fundamental Concepts. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 6, 2023 – May 2024
6:00 PM – 9:00 PM – Mondays & Wednesdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 159 classroom hours covering the following areas: Basic Safety; Introduction to Construction Math; Introduction to Hand Tools; Introduction to Power Tools; Introduction to Construction Drawings; Basic Rigging; Basic Communication Skills; Basic Employability Skills; Introduction to Materials Handling; Orientation to the Electrical Trade; Electrical Safety; Introduction to Electrical Circuits; Electrical Theory; Introduction to the National Electrical Code (NEC); Device Boxes; Hand Bending; Raceways and Fittings; Conductors and Cables; Basic Electrical Construction Drawings; Residential Electrical Services; Electrical Test Equipment. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 6, 2023 – May 2024
6:00 – 9:00 PM – Mondays & Wednesdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 120 classroom hours covering the following areas: Applied Math; Sizing and Protecting the Water Supply System; Potable Water Supply Treatment; Types of Venting; Sizing DWV and Storm Systems; Sewage Pumps and Sump Pumps; Corrosive-Resistant Waste Piping; Compressed Air; Service Plumbing.

September 6, 2022 – May 2023
5:30 PM – 8:30 PM – Mondays & Wednesdays

Tuition: $1,405.00

Early Bird Pricing (6/19/23-7/1/23) – Tuition: $1,230.00

This course consists of 120 classroom hours covering the following areas: Review of all sections of the Massachusetts State Plumbing Code 248 CMR 3.00, 248 CMR 10.00, and 248 CMR 11.00; Review of all sections of NFPA-54-2012, NFPA-58-2011, Massachusetts Fuel Gas Code 248 CMR 4.00, Amendments for NFPA-54-2012 248 CMR 5.00, Large Gas Utilization Equipment 248 CMR 7.00 and Amendments to NFPA 58-2011 248 CMR 8.00; Review of all plumbing related math covered in Tier I through Tier V; review of all sketches in Massachusetts State Plumbing Code Section 10.22 Figures; Business Related Costs.

September 6, 2023 – May 2024
5:30 PM – 8:30 PM – Mondays & Wednesdays

Tuition: $1,405.00

Early Bird Pricing (6/19/23-7/1/23) – Tuition: $1,230.00

This course consists of 159 classroom hours covering the following areas: Trade Math – Estimating; Fume Exhaust Design; Introduction to Welding, Brazing and Cutting; Advanced Architectural Sheet Metal; Hands-on Shop Fabrication; and Exam Review and Preparation.

September 6, 2023 – May 2024
5:30 – 8:30 PM // Mondays & Wednesdays

Tuition: $1,690.00

Early Bird Pricing (6/19/23-7/1/23) – Tuition: $1,515.00

This course consists of 159 classroom hours covering the following areas: Basic Safety; Introduction to Construction Math; Introduction to Hand Tools; Introduction to Power Tools; Introduction to Construction Drawings; Basic Rigging; Basic Communication Skills; Basic Employability Skills; Introduction to Materials Handling; Orientation to the Electrical Trade; Electrical Safety; Introduction to Electrical Circuits; Electrical Theory; Introduction to the National Electrical Code (NEC); Device Boxes; Hand Bending; Raceways and Fittings; Conductors and Cables; Basic Electrical Construction Drawings; Residential Electrical Services; Electrical Test Equipment. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 6, 2023 – May 2024
5:00 – 8:00 PM – Mondays & Wednesdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 159 classroom hours covering the following areas: Alternating Current; Motors: Theory and Application; Electric Lighting; Conduit Bending; Pull and Junction Boxes; Conductor Installations; Cable Tray; Conductor Terminations and Splices; Grounding and Bonding; Circuit Breakers and Fuses; Control Systems and Fundamental Concepts. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 5, 2023 – May 2024
5:00 PM – 8:00 PM – Tuesdays & Thursdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 159 classroom hours covering the following areas: Load Calculations – Branch and Feeder Circuits; Conductor Selection and Calculations; Practical Applications of Lighting; Hazardous Locations; Overcurrent Protection; Distribution Equipment; Transformers; Commercial Electrical Services; Motor Calculations; Voice, Data, and Video; Motor Controls. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 6, 2023 – May 2024
5:00 PM – 8:00 PM – Mondays & Wednesdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 159 classroom hours covering the following areas: Load Calculations –Feeders and Services; Health Care Facilities; Standby and Emergency Systems; Basic Electronic Theory; Fire Alarm Systems; Specialty Transformers; Advanced Controls; HVAC Controls; Heat Tracing and Freeze Protection; Motor Operation and Maintenance; Medium-Voltage Terminations/Splices; Special Locations; Fundamentals of Crew Leadership. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 5, 2023 – May 2024
5:00 – 8:00 PM – Tuesdays & Thursdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 120 classroom hours covering the following areas: Review of all sections of the Massachusetts State Plumbing Code 248 CMR 3.00, 248 CMR 10.00, and 248 CMR 11.00; Review of all sections of NFPA-54-2012, NFPA-58-2011, Massachusetts Fuel Gas Code 248 CMR 4.00, Amendments for NFPA-54-2012 248 CMR 5.00, Large Gas Utilization Equipment 248 CMR 7.00 and Amendments to NFPA 58-2011 248 CMR 8.00; Review of all plumbing related math covered in Tier I through Tier V; review of all sketches in Massachusetts State Plumbing Code Section 10.22 Figures; Business Related Costs.

September 5, 2023 – May 2024
4:00 PM – 7:00 PM – Tuesdays & Thursdays

Tuition: $1,405.00

Early Bird Pricing (6/19/23-7/1/23) – Tuition: $1,230.00

This course consists of 120 classroom hours covering the following areas: Business Principles for Plumbers; Fundamentals of Crew Leadership; Water Pressure Booster and Recirculation Systems; Indirect and Special Waste; Hydronic and Solar Heating Systems; Codes; Private Water Supply Well Systems; Private Waste-Disposal Systems; Swimming Pools and Hot Tubs; Plumbing for Mobile Homes and Travel Trailer Parks; Introduction to Medical Gas and Vacuum Systems.

September 6, 2023 – May 2024

4:00 PM – 7:00 PM // Mondays & Wednesdays

Tuition: $1,405.00

Early Bird Pricing (6/19/23-7/1/23) – Tuition: $1,230.00

This course consists of 120 classroom hours covering the following areas: Applied Math; Sizing and Protecting the Water Supply System; Potable Water Supply Treatment; Types of Venting; Sizing DWV and Storm Systems; Sewage Pumps and Sump Pumps; Corrosive-Resistant Waste Piping; Compressed Air; Service Plumbing.

September 5, 2023 – May 2024
4:00 PM – 7:00 PM – Tuesdays & Thursdays

Tuition: $1,405.00

Early Bird Pricing (6/19/23-7/1/23) – Tuition: $1,230.00

This course consists of 120 classroom hours covering the following areas: Plumbing Math Two; Reading Commercial Drawings; Structural Penetrations, Insulation, and Fire-Stopping; Installing and Testing DWV Piping; Installing Roof, Floor, and Area Drains; Installing and Testing Water Supply Piping; Types of Valves; Installing Fixtures and Valves; Installing Water Heaters; Basic Electricity; Fuel Gas and Fuel Oil Systems.

January 2024 – May 2024
5:00 PM – 8:00 PM – Tuesdays, Wednesdays & Thursdays
Tuition Price: $1,405.00

This course will open for registration in December 2023. Enroll in the Plumbing Tier 1 & Tier 2 Bundle to save money and enroll early. Registrations for Plumbing Tier 2 will not be accepted until December 2023. 

Save time and money by enrolling in the Plumbing Tier 1 & Tier 2 Bundle! 

Plumbing Tier 2 begins in January 2024. Enroll in both Plumbing Tier 1 and Tier 2 by July 1, 2023 and save $350 total on both courses.  Enroll in both Plumbing Tier 1 and Tier 2 by August 31, 2023 and save $175 total on both courses. Plumbing Tier 2 will be available for enrollment outside of this bundle in December 2023. Get that much closer to your license and sign up today! 

This course consists of 120 classroom hours covering the following areas: Basic Safety; Introduction to Construction Math; Introduction to Hand Tools; Introduction to Power Tools; Introduction to Construction Drawings; Basic Rigging; Basic Communication Skills; Basic Employability Skills; Introduction to Materials Handling; Introduction to Plumbing; Plumbing Safety; Tools of the Plumbing Trade; Introduction to Plumbing Math; Introduction to Plumbing Drawings; Plastic Pipe and Fittings; Copper Tube and Fittings; Cast-Iron Pipe and Fittings; Carbon Steel Pipe and Fittings; Introduction to Plumbing Fixtures; Introduction to Drain, Waste, and Vent (DWV) Systems.

September 5, 2023 – January 2024
5:00 PM – 8:00 PM – Tuesdays, Wednesdays & Thursdays

Tuition: $1,405.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,230.00

Save time and money by enrolling in the Plumbing Tier 1 & Tier 2 Bundle! 

Plumbing Tier 2 begins in January 2024. Enroll in both Plumbing Tier 1 and Tier 2 by July 1, 2023 and save $350 total on both courses.  Enroll in both Plumbing Tier 1 and Tier 2 by August 31, 2023 and save $175 total on both courses. Plumbing Tier 2 will be available for enrollment outside of this bundle in December 2023. Get that much closer to your license and sign up today! 

This course consists of 120 classroom hours covering the following areas: Basic Safety; Introduction to Construction Math; Introduction to Hand Tools; Introduction to Power Tools; Introduction to Construction Drawings; Basic Rigging; Basic Communication Skills; Basic Employability Skills; Introduction to Materials Handling; Introduction to Gas Fitting; Safety and Installation Practices; General Provisions for Gas Work in Massachusetts 248 CMR 3.00; Education and Experience Requirements for Licensure 248 CMR 11.00; Massachusetts Modifications to Sections of NFPA 54 248 CMR 4.00 & 5.00; Gas Piping System Design, Material and Components; and Gas Piping Installation.

September 5, 2023 – May 2024
4:00 PM – 7:00 PM Tuesdays & Thursdays

Tuition: $1,405.00

Early Bird Pricing (6/19/23-7/1/23) – Tuition: $1,230.00

This 168 hours Certified Program as per requirements contained in “237 CMR 22.02: Required Electrical Education as a Prerequisite for Master Electrician Examination” will focus the attention of the Eligible Candidate to the current testing edition of the National Electrical Code (NFPA 70-2020) with particular attention also given to the Commonwealth of Massachusetts Electrical Code Amendments (527 CMR 12:00) as contained in the current edition of the National Electrical Code (NFPA 70-2020) and other required documents and information required to sit for the test.

This course is intended to supplement the continuing studies of the serious Eligible Candidate, with emphasis on assisting the Eligible Candidate to pass the desired Commonwealth of Massachusetts, Certificate A (Master) Electrician License Examination. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 6, 2023 – May 2024
5:00 PM – 8:00 PM – Mondays & Wednesdays
Tuition Price: $1,895.00 + $265.00 optional book fee

This course consists of 168 classroom hours covering the following areas: Load Calculations –Feeders and Services; Health Care Facilities; Standby and Emergency Systems; Basic Electronic Theory; Fire Alarm Systems; Specialty Transformers; Advanced Controls; HVAC Controls; Heat Tracing and Freeze Protection; Motor Operation and Maintenance; Medium-Voltage Terminations/Splices; Special Locations; Fundamentals of Crew Leadership. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 5, 2023 – May 2024
5:00 PM – 8:00 PM – Tuesdays & Thursdays

Tuition: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – Tuition: $2,076.00

This course consists of 168 classroom hours covering the following areas: Load Calculations – Branch and Feeder Circuits; Conductor Selection and Calculations; Practical Applications of Lighting; Hazardous Locations; Overcurrent Protection; Distribution Equipment; Transformers; Commercial Electrical Services; Motor Calculations; Voice, Data, and Video; Motor Controls. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 5, 2023 – May 2024
5:00 PM – 8:00 PM – Tuesdays & Thursdays

Tuition: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – Tuition: $2,076.00

This course consists of 168 classroom hours covering the following areas: Alternating Current; Motors: Theory and Application; Electric Lighting; Conduit Bending; Pull and Junction Boxes; Conductor Installations; Cable Tray; Conductor Terminations and Splices; Grounding and Bonding; Circuit Breakers and Fuses; Control Systems and Fundamental Concepts. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 5, 2023 – May 2024
5:00 PM – 8:00 PM – Tuesdays & Thursdays

Tuition: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – Tuition: $2,076.00

This course consists of 168 classroom hours covering the following areas: Basic Safety; Introduction to Construction Math; Introduction to Hand Tools; Introduction to Power Tools; Introduction to Construction Drawings; Basic Rigging; Basic Communication Skills; Basic Employability Skills; Introduction to Materials Handling; Orientation to the Electrical Trade; Electrical Safety; Introduction to Electrical Circuits; Electrical Theory; Introduction to the National Electrical Code (NEC); Device Boxes; Hand Bending; Raceways and Fittings; Conductors and Cables; Basic Electrical Construction Drawings; Residential Electrical Services; Electrical Test Equipment. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 5, 2023 – May 2024
5:00 PM – 8:00 PM – Tuesdays & Thursdays

Tuition: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – Tuition: $2,076.00

This course consists of 159 classroom hours covering the following areas: Excavations; Underground Pipe Installations; Rigging Equipment; Rigging Practices; Standards & Specifications; Advanced Trade Math; Motorized Equipment II; Introduction to Aboveground Pipe Installations; Field Routing & Vessel Trim; Pipe Hangers & Supports; Testing Pipe Systems & Equipment; Advanced Blueprint Reading; Stress Relieving & Aligning; Maintaining Valves; Introduction to Supervisory Roles.

September 6, 2023 – May 2024
5:00 – 8:00 PM – Mondays & Wednesdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 159 classroom hours covering the following areas: Trade Math II; Introduction to Supervisory Skills; Air Properties and Distribution; Principles of Airflow; Air Testing and Balancing; Fabrication III – Triangulation; Plans and Specifications; and Hands-on Shop Fabrication.

September 6, 2023 – May 2024
5:00 – 8:00 PM Mondays & Wednesdays 

ABC Member: $2,089.00 / Not Yet A Member: $2,476.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,914.00 / Not Yet A Member: $2,301.00

** This will be a hands-on training course. The extra cost is for materials.

This course consists of 159 classroom hours covering the following areas: Trade Math – Estimating; Fume Exhaust Design; Introduction to Welding, Brazing and Cutting; Advanced Architectural Sheet Metal; Hands-on Shop Fabrication; and Exam Review and Preparation.

September 6, 2023 – May 2024
5:00 – 8:00 PM // Mondays & Wednesdays

ABC Member: $2,089.00 / Not Yet A Member: $2,476.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,914.00 / Not Yet A Member: $2,301.00

** This will be a hands-on training course. The extra cost is for materials.

This course consists of 159 classroom hours covering the following areas: Hangers, Supports, Restraints, and Guides; General Purpose Valves; General Trade Math; Shop Drawings; Standard Spray Fire Sprinklers; Wet Fire Sprinkler Systems; Dry-Pipe Systems.

September 6, 2023 – May 2024

5:00 – 8:00pm – Mondays & Wednesdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 159 classroom hours covering the following areas: Deluge Preaction Systems; Standpipes; Water Supplies; Fire Pumps; Application-Specific Sprinklers and Nozzles.

September 5, 2023 – May 2024

5:00 – 8:00pm – Tuesdays & Thursdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 159 classroom hours covering the following areas: Introduction to Sheet Metal; Basic Safety; Introduction to Hand Tools; Introduction to Power Tools; Introduction to B.G.L. c 112 s 237-251 and 271 CMR; Basic Rigging; Introduction to Materials Handling; Basic Communication Skills; Basic Employability Skills; Introduction to Construction Math; Introduction to Construction Drawings; Tools of the Trade; Installation of Ductwork.

September 5, 2023 – May 2024
5:30 – 8:30PM – Tuesdays & Thursdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 159 classroom hours covering the following areas: Safety Review; Trade Math 104; Shop Production and Organization; Installation of Air Distribution Accessories; Air Systems; Duct Fabrication Standards; Introduction to Layout; Fabrication I – Parallel Line Development; Fabrication II – Radial Line Development; and Hands-on Shop Fabrication.

September 6, 2023 – May 2024
5:30 – 8:30 PM – Mondays & Wednesdays

ABC Member: $2,089.00 / Not Yet A Member: $2,476.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,914.00 / Not Yet A Member: $2,301.00

This course consists of 159 classroom hours covering the following areas: Massachusetts Uniform Sheet Metal Code; Trade Math III – Field Measuring; Comprehensive Plan and Specification Reading; Soldering; Architectural Sheet Metal; Louvers, Dampers and Access Doors; Fabrication IV – Comprehensive Review; and Hands-on Shop Fabrication.

September 5, 2023 – May 2024
5:30 – 8:30 PM – Tuesdays & Thursdays

ABC Member: $2,089.00 / Not Yet A Member: $2,476.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,914.00 / Not Yet A Member: $2,301.00

** This will be a hands-on training course. The extra cost is for materials.

This course consists of 159 classroom hours covering the following areas: Basic Safety; Introduction to Construction Math; Introduction to Hand Tools; Introduction to Power Tools; Introduction to Construction Drawings; Basic Rigging; Basic Communication Skills; Basic Employability Skills; Introduction to Materials Handling; Orientation to the Trade; Introduction to Components and Systems; Steel Pipe; CPVC Pipe and Fittings; Copper Tube Systems; Underground Pipe.

September 5, 2023 – May 2024
5:30 – 8:30 PM – Tuesdays & Thursdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 159 classroom hours covering the following areas: Alternating Current; Compressors; Refrigerants and Oils; Leak Detection, Evacuation, Recovering, and Charging; Metering Devices; Heat Pumps; Basic Maintenance; Chimneys, Vents and Flues; Sheet Metal Duct Systems; Fiberglass and Flexible Duct Systems; Commercial Airside Systems; Air Quality Equipment; Introduction to Hydronic Systems.

September 6, 2023 – May 2024
5:30 – 8:30 PM – Mondays & Wednesdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 159 classroom hours covering the following areas: Introduction to Sheet Metal; Basic Safety; Introduction to Hand Tools; Introduction to Power Tools; Introduction to B.G.L. c 112 s 237-251 and 271 CMR; Basic Rigging; Introduction to Materials Handling; Basic Communication Skills; Basic Employability Skills; Introduction to Construction Math; Introduction to Construction Drawings; Tools of the Trade; Installation of Ductwork.

September 5, 2023 – May 2024
5:30PM – 8:30PM – Tuesdays & Thursdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 159 classroom hours covering the following areas: Safety Review; Trade Math 104; Shop Production and Organization; Installation of Air Distribution Accessories; Air Systems; Duct Fabrication Standards; Introduction to Layout; Fabrication I – Parallel Line Development; Fabrication II – Radial Line Development; and Hands-on Shop Fabrication.

September 6, 2023 – May 2024
5:30 PM – 8:30 PM – Mondays & Wednesdays

ABC Member: $2,089.00 / Not Yet A Member: $2,476.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,914.00 / Not Yet A Member: $2,301.00

*Note: There will be 30 hours of shop time instructed in person during February and March 2024. Specific information regarding location and dates of shop time will be communicated during the school year.

** This will be a hands-on training course. The extra cost is for materials.**

This VIRTUAL course consists of 109 classroom hours covering the following areas: Refrigeration Theory; Evaporators; Metering Devices; Condensers; Compressors; Refrigeration Accessories; Refrigerants; Operation, Pressures & Temperatures; AC and Refrigeration Math; Multi Temperature Systems; Other Refrigeration Systems; Motors; Purgers and Absorption Systems; Definitions from ASHRAE 15 & 34; The Mass Refrigeration Code. It is required that all students bring a copy of the current ASHRAE books (15 & 34) to class.

Tuesdays, Wednesdays & Thursdays – March 12, 2024 – May 2024 – 5:30 – 8:30 PM

ABC Member: $1,985.00 / Not Yet A Member: $2,323.00

This course consists of 159 classroom hours covering the following areas: Basic Safety; Introduction to Construction Math; Introduction to Hand Tools; Introduction to Power Tools; Introduction to Construction Drawings; Basic Rigging; Basic Communication Skills; Basic Employability Skills; Introduction to Materials Handling; Orientation to the Electrical Trade; Electrical Safety; Introduction to Electrical Circuits; Electrical Theory; Introduction to the National Electrical Code (NEC); Device Boxes; Hand Bending; Raceways and Fittings; Conductors and Cables; Basic Electrical Construction Drawings; Residential Electrical Services; Electrical Test Equipment. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 5, 2023 – May 2024
5:30 – 8:30 PM – Tuesdays & Thursdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 168 classroom hours and practical application covering the following areas: Basic Safety; Introduction to Construction Math; Introduction to Hand Tools; Introduction to Power Tools; Introduction to Construction Drawings; Basic Rigging; Basic Communication Skills; Basic Employability Skills; Introduction to Materials Handling; Orientation to the Electrical Trade; Electrical Safety; Introduction to Electrical Circuits; Electrical Theory; Introduction to the National Electrical Code (NEC); Device Boxes; Hand Bending; Raceways and Fittings; Conductors and Cables; Basic Electrical Construction Drawings; Residential Electrical Services; Electrical Test Equipment. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 5, 2023 – May 2024
7:00 – 3:30 AM – Tuesdays, every other week

ABC Member: $2,089.00 / Not Yet A Member: $2,476.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,914.00 / Not Yet A Member: $2,301.00

This course consists of 159 classroom hours covering the following areas: Alternating Current; Motors: Theory and Application; Electric Lighting; Conduit Bending; Pull and Junction Boxes; Conductor Installations; Cable Tray; Conductor Terminations and Splices; Grounding and Bonding; Circuit Breakers and Fuses; Control Systems and Fundamental Concepts. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 6, 2023 – May 2024
5:00 PM – 8:00 PM – Mondays & Wednesdays

ABC Member: $1,864.00 / Not Yet A Member: $2,251.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,689.00 / Not Yet A Member: $2,076.00

This course consists of 168 classroom hours and practical application covering the following areas: Alternating Current; Motors: Theory and Application; Electric Lighting; Conduit Bending; Pull and Junction Boxes; Conductor Installations; Cable Tray; Conductor Terminations and Splices; Grounding and Bonding; Circuit Breakers and Fuses; Control Systems and Fundamental Concepts. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 12, 2023 – May 2024
7:00 AM – 3:30 PM – Tuesdays, every other week

ABC Member: $2,089.00 / Not Yet A Member: $2,476.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,914.00 / Not Yet A Member: $2,301.00

This course consists of 168 classroom hours and practical application covering the following areas: Load Calculations – Branch and Feeder Circuits; Conductor Selection and Calculations; Practical Applications of Lighting; Hazardous Locations; Overcurrent Protection; Distribution Equipment; Transformers; Commercial Electrical Services; Motor Calculations; Voice, Data, and Video; Motor Controls. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 7, 2023 – May 2024
7:00 AM – 3:30 PM – Thursdays, every other week

ABC Member: $2,089.00 / Not Yet A Member: $2,476.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,914.00 / Not Yet A Member: $2,301.00

This course consists of 168 classroom hours and practical application covering the following areas: Load Calculations –Feeders and Services; Health Care Facilities; Standby and Emergency Systems; Basic Electronic Theory; Fire Alarm Systems; Specialty Transformers; Advanced Controls; HVAC Controls; Heat Tracing and Freeze Protection; Motor Operation and Maintenance; Medium-Voltage Terminations/Splices; Special Locations; Fundamentals of Crew Leadership. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 14, 2023 – May 2024
7:00 AM – 3:30 PM – Thursdays, every other week

ABC Member: $2,089.00 / Not Yet A Member: $2,476.00

Early Bird Pricing (6/19/23-7/1/23) – ABC Member: $1,914.00 / Not Yet A Member: $2,301.00

This 159 hours Certified Program as per requirements contained in “237 CMR 22.02: Required Electrical Education as a Prerequisite for Master Electrician Examination” will focus the attention of the Eligible Candidate to the current testing edition of the National Electrical Code (NFPA 70-2020) with particular attention also given to the Commonwealth of Massachusetts Electrical Code Amendments (527 CMR 12:00) as contained in the current edition of the National Electrical Code (NFPA 70-2020) and other required documents and information required to sit for the test.

This course is intended to supplement the continuing studies of the serious Eligible Candidate, with emphasis on assisting the Eligible Candidate to pass the desired Commonwealth of Massachusetts, Certificate A (Master) Electrician License Examination. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

Begins June 24, 2024
7:00 AM – 3:30 PM – Monday – Friday ~ Four Week Course
Tuition Price: $1,895.00 + $265.00 optional book fee

Course Dates:

June 24 – 28; July 8 – 12; July 15 – 19; July 22 – 26