Proud ally of:

BILLERICA - GCI TRAINING FACILITY

9 Executive Park Drive, #100, North Billerica, MA 01862

 

Classes available for BILLERICA - GCI TRAINING FACILITY

 

Plumbing Tier 4

This course consists of 120 classroom hours covering the following areas: Business Principles for Plumbers; Fundamentals of Crew Leadership; Water Pressure Booster and Recirculation Systems; Indirect and Special Waste; Hydronic and Solar Heating Systems; Codes; Private Water Supply Well Systems; Private Waste-Disposal Systems; Swimming Pools and Hot Tubs; Plumbing for Mobile Homes and Travel Trailer Parks; Introduction to Medical Gas and Vacuum Systems.

September 5, 2024 – June 2025
5:00 PM – 9:00 PM – Thursdays*

ABC Member: $1,503.00 / Not Yet A Member: $1,999.00

Early Bird Pricing (6/17/24-7/1/24) – ABC Member: $1,328.00 / Not Yet A Member: $1,824.00

*Schedule Update: Night classes at our Billerica location will be held one night per week for 4 hours per night through the end of June 2025. We will also hold classes during February and April school vacations.

Locations:

BILLERICA - GCI TRAINING FACILITY

Trade:

Plumbing

Plumbing Tier 3

This course consists of 120 classroom hours covering the following areas: Applied Math; Sizing and Protecting the Water Supply System; Potable Water Supply Treatment; Types of Venting; Sizing DWV and Storm Systems; Sewage Pumps and Sump Pumps; Corrosive-Resistant Waste Piping; Compressed Air; Service Plumbing.

September 3, 2024 – June 2025
5:00 PM – 9:00 PM – Tuesdays*

ABC Member: $1,503.00 / Not Yet A Member: $1,999.00

Early Bird Pricing (6/17/24-7/1/24) – ABC Member: $1,328.00 / Not Yet A Member: $1,824.00

*Schedule Update: Night classes at our Billerica location will be held one night per week for 4 hours per night through the end of June 2025. We will also hold classes during February and April school vacations.

Locations:

BILLERICA - GCI TRAINING FACILITY

Trade:

Plumbing

Electrical 4

This course consists of 160 classroom hours and practical application covering the following areas: Load Calculations –Feeders and Services; Health Care Facilities; Standby and Emergency Systems; Basic Electronic Theory; Fire Alarm Systems; Specialty Transformers; Advanced Controls; HVAC Controls; Heat Tracing and Freeze Protection; Motor Operation and Maintenance; Medium-Voltage Terminations/Splices; Special Locations; Fundamentals of Crew Leadership. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 5, 2024 – May 2025
5:00 PM – 9:00 PM – Thursdays*

ABC Member: $1,999.00 / Not Yet A Member: $2,417.00

Early Bird Pricing (6/17/24-7/1/24) – ABC Member: $1,824.00 / Not Yet A Member: $2,242.00

*Schedule Update: Night classes at our Billerica location will be held one night per week for 4 hours per night through the end of June 2025. We will also hold classes during February and April school vacations.

Locations:

BILLERICA - GCI TRAINING FACILITY

Trade:

Electrical

Electrical 3

This course consists of 160 classroom hours and practical application covering the following areas: Load Calculations – Branch and Feeder Circuits; Conductor Selection and Calculations; Practical Applications of Lighting; Hazardous Locations; Overcurrent Protection; Distribution Equipment; Transformers; Commercial Electrical Services; Motor Calculations; Voice, Data, and Video; Motor Controls. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 9, 2024 – May 2025
5:00 PM – 9:00 PM – Mondays*

ABC Member: $1,999.00 / Not Yet A Member: $2,417.00

Early Bird Pricing (6/17/24-7/1/24) – ABC Member: $1,824.00 / Not Yet A Member: $2,242.00

*Schedule Update: Night classes at our Billerica location will be held one night per week for 4 hours per night through the end of June 2025. We will also hold classes during February and April school vacations.

Locations:

BILLERICA - GCI TRAINING FACILITY

Trade:

Electrical

Electrical 4 (Daytime Program with Practical Application)

This course consists of 160 classroom hours and practical application covering the following areas: Load Calculations –Feeders and Services; Health Care Facilities; Standby and Emergency Systems; Basic Electronic Theory; Fire Alarm Systems; Specialty Transformers; Advanced Controls; HVAC Controls; Heat Tracing and Freeze Protection; Motor Operation and Maintenance; Medium-Voltage Terminations/Splices; Special Locations; Fundamentals of Crew Leadership. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 5, 2024 – February 2025
7:00 – 3:30 AM – Thursdays, weekly

ABC Member: $2,249.00 / Not Yet A Member: $2,667.00

Early Bird Pricing (6/17/24-7/1/24) – ABC Member: $2,074.00 / Not Yet A Member: $2,492.00

Locations:

BILLERICA - GCI TRAINING FACILITY

Trade:

Electrical

Electrical 3 (Daytime Program with Practical Application)

This course consists of 160 classroom hours and practical application covering the following areas: Load Calculations – Branch and Feeder Circuits; Conductor Selection and Calculations; Practical Applications of Lighting; Hazardous Locations; Overcurrent Protection; Distribution Equipment; Transformers; Commercial Electrical Services; Motor Calculations; Voice, Data, and Video; Motor Controls. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

February 20, 2025 – July 2025
7:00 – 3:30 AM – Thursdays, weekly

ABC Member: $2,249.00 / Not Yet A Member: $2,667.00

Early Bird Pricing (6/17/24-7/1/24) – ABC Member: $2,074.00 / Not Yet A Member: $2,492.00

Locations:

BILLERICA - GCI TRAINING FACILITY

Trade:

Electrical

Electrical 2 (Daytime Program with Practical Application)

This course consists of 160 classroom hours and practical application covering the following areas: Alternating Current; Motors: Theory and Application; Electric Lighting; Conduit Bending; Pull and Junction Boxes; Conductor Installations; Cable Tray; Conductor Terminations and Splices; Grounding and Bonding; Circuit Breakers and Fuses; Control Systems and Fundamental Concepts. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 3, 2024 – February 2025
7:00 – 3:30 AM – Tuesdays, weekly

ABC Member: $2,249.00 / Not Yet A Member: $2,667.00

Early Bird Pricing (6/17/24-7/1/24) – ABC Member: $2,074.00 / Not Yet A Member: $2,492.00

Locations:

BILLERICA - GCI TRAINING FACILITY

Trade:

Electrical

Electrical 1 (Daytime Program with Practical Application)

This course consists of 160 classroom hours and practical application covering the following areas: Basic Safety; Introduction to Construction Math; Introduction to Hand Tools; Introduction to Power Tools; Introduction to Construction Drawings; Basic Rigging; Basic Communication Skills; Basic Employability Skills; Introduction to Materials Handling; Orientation to the Electrical Trade; Electrical Safety; Introduction to Electrical Circuits; Electrical Theory; Introduction to the National Electrical Code (NEC); Device Boxes; Hand Bending; Raceways and Fittings; Conductors and Cables; Basic Electrical Construction Drawings; Residential Electrical Services; Electrical Test Equipment. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

February 18, 2025 – July 2025
7:00 – 3:30 AM – Tuesdays, weekly

ABC Member: $2,249.00 / Not Yet A Member: $2,667.00

Early Bird Pricing (6/17/24-7/1/24) – ABC Member: $2,074.00 / Not Yet A Member: $2,492.00

Locations:

BILLERICA - GCI TRAINING FACILITY

Trade:

Electrical

Electrical 2

This course consists of 160 classroom hours covering the following areas: Alternating Current; Motors: Theory and Application; Electric Lighting; Conduit Bending; Pull and Junction Boxes; Conductor Installations; Cable Tray; Conductor Terminations and Splices; Grounding and Bonding; Circuit Breakers and Fuses; Control Systems and Fundamental Concepts. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 4, 2024 – May 2025
5:00 PM – 9:00 PM – Wednesdays*

ABC Member: $1,999.00 / Not Yet A Member: $2,417.00

Early Bird Pricing (6/17/24-7/1/24) – ABC Member: $1,824.00 / Not Yet A Member: $2,242.00

*Schedule Update: Night classes at our Billerica location will be held one night per week for 4 hours per night through the end of June 2025. We will also hold classes during February and April school vacations.

Locations:

BILLERICA - GCI TRAINING FACILITY

Trade:

Electrical

Electrical 1

This course consists of 160 classroom hours covering the following areas: Basic Safety; Introduction to Construction Math; Introduction to Hand Tools; Introduction to Power Tools; Introduction to Construction Drawings; Basic Rigging; Basic Communication Skills; Basic Employability Skills; Introduction to Materials Handling; Orientation to the Electrical Trade; Electrical Safety; Introduction to Electrical Circuits; Electrical Theory; Introduction to the National Electrical Code (NEC); Device Boxes; Hand Bending; Raceways and Fittings; Conductors and Cables; Basic Electrical Construction Drawings; Residential Electrical Services; Electrical Test Equipment. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.

September 3, 2024 – May 2025
5:00 – 9:00 PM – Tuesdays*

ABC Member: $1,999.00 / Not Yet A Member: $2,417.00

Early Bird Pricing (6/17/24-7/1/24) – ABC Member: $1,999.00 / Not Yet A Member: $2,667.00

*Schedule Update: Night classes at our Billerica location will be held one night per week for 4 hours per night through the end of June 2025. We will also hold classes during February and April school vacations.

Locations:

BILLERICA - GCI TRAINING FACILITY

Trade:

Electrical

Pipefitting 1

This course consists of 160 classroom hours covering the following areas: Basic Safety; Introduction to Construction Math; Introduction to Hand Tools; Introduction to Power Tools; Introduction to Construction Drawings; Basic Rigging; Basic Communication Skills; Basic Employability Skills; Introduction to Materials Handling; Orientation to the Trade; Pipefitting Hand Tools; Pipefitting Power Tools; Oxyfuel Cutting; Ladder & Scaffolds; Motorized Equipment; Piping Systems; Drawing & Detail Sheets; Identifying & Installing Valves; Pipefitting Trade Math; Threaded Pipe Fabrication; Socket Weld Pipe Fabrications & Butt Weld Pipe Fabrication

September 4, 2024 – May 2025
5:00 – 9:00 PM – Wednesdays*

ABC Member: $1,999.00 / Not Yet A Member: $2,417.00

Early Bird Pricing (6/17/24-7/1/24) – ABC Member: $1,824.00 / Not Yet A Member: $2,242.00

*Schedule Update: Night classes at our Billerica location will be held one night per week for 4 hours per night through the end of June 2025. We will also hold classes during February and April school vacations.

Locations:

BILLERICA - GCI TRAINING FACILITY

Trade:

Pipefitting

Sprinklerfitting 2

This course consists of 160 classroom hours covering the following areas: Hangers, Supports, Restraints, and Guides; General Purpose Valves; General Trade Math; Shop Drawings; Standard Spray Fire Sprinklers; Wet Fire Sprinkler Systems; Dry-Pipe Systems.

September 3, 2024 – May 2025 – 5:00 – 9:00 PM – Tuesdays*

ABC Member: $1,999.00 / Not Yet A Member: $2,417.00

Early Bird Pricing (6/17/24-7/1/24) – ABC Member: $1,824.00 / Not Yet A Member: $2,242.00

*Schedule Update: Night classes at our Billerica location will be held one night per week for 4 hours per night through the end of June 2025. We will also hold classes during February and April school vacations.

 

Locations:

BILLERICA - GCI TRAINING FACILITY

Trade:

Sprinkler & Gas Fitting

Sheet Metal 5 (Hands-On)

This course consists of 160 classroom hours covering the following areas: Trade Math – Estimating; Fume Exhaust Design; Introduction to Welding, Brazing and Cutting; Advanced Architectural Sheet Metal; Hands-on Shop Fabrication; and Exam Review and Preparation.

September 3, 2024 – May 2025 – 5:00 – 9:00 PM – Wednesdays*

ABC Member: $2,249.00 / Not Yet A Member: $2,667.00

Early Bird Pricing (6/17/24-7/1/24) – ABC Member: $2,074.00 / Not Yet A Member: $2,492.00

*Schedule Update: Night classes at our Billerica location will be held one night per week for 4 hours per night through the end of June 2025. We will also hold classes during February and April school vacations.

This will be a hands-on training course. The extra cost is for materials.

Locations:

BILLERICA - GCI TRAINING FACILITY

Trade:

Sheet Metal

Sheet Metal 1

This course consists of 160 classroom hours covering the following areas: Introduction to Sheet Metal; Basic Safety; Introduction to Hand Tools; Introduction to Power Tools; Introduction to B.G.L. c 112 s 237-251 and 271 CMR; Basic Rigging; Introduction to Materials Handling; Basic Communication Skills; Basic Employability Skills; Introduction to Construction Math; Introduction to Construction Drawings; Tools of the Trade; Installation of Ductwork.

September 3, 2024 – May 2025 – 5:00 – 9:00 PM – Tuesdays OR Wednesdays

ABC Member: $1,999.00 / Not Yet A Member: $2,417.00

Early Bird Pricing (6/17/24-7/1/24) – ABC Member: $1,824.00 / Not Yet A Member: $2,242.00

*Schedule Update: Night classes at our Billerica location will be held one night per week for 4 hours per night through the end of June 2025. We will also hold classes during February and April school vacations.

Locations:

BILLERICA - GCI TRAINING FACILITY

Trade:

Sheet Metal

Sheet Metal 2 (Hands-On)

This course consists of 160 classroom hours covering the following areas: Safety Review; Trade Math 104; Shop Production and Organization; Installation of Air Distribution Accessories; Air Systems; Duct Fabrication Standards; Introduction to Layout; Fabrication I – Parallel Line Development; Fabrication II – Radial Line Development; and Hands-on Shop Fabrication.

September 4, 2024 – May 2025 – 5:00 – 9:00 PM – Wednesdays*

ABC Member: $2,249.00 / Not Yet A Member: $2,667.00

Early Bird Pricing (6/17/24-7/1/24) – ABC Member: $2,074.00 / Not Yet A Member: $2,492.00

*Schedule Update: Night classes at our Billerica location will be held one night per week for 4 hours per night through the end of June 2025. We will also hold classes during February and April school vacations.

This will be a hands-on training course. The extra cost is for materials.

Locations:

BILLERICA - GCI TRAINING FACILITY

Trade:

Sheet Metal

Sheet Metal 3 (Hands-On)

This course consists of 160 classroom hours covering the following areas: Trade Math II; Introduction to Supervisory Skills; Air Properties and Distribution; Principles of Airflow; Air Testing and Balancing; Fabrication III – Triangulation; Plans and Specifications; and Hands-on Shop Fabrication.

September 4, 2024 – May 2025 – 5:00 – 9:00 PM – Mondays OR Wednesdays*

ABC Member: $2,249.00 / Not Yet A Member: $2,667.00

Early Bird Pricing (6/17/24-7/1/24) – ABC Member: $2,074.00 / Not Yet A Member: $2,492.00

*Schedule Update: Night classes at our Billerica location will be held one night per week for 4 hours per night through the end of June 2025. We will also hold classes during February and April school vacations.

This will be a hands-on training course. The extra cost is for materials.

Locations:

BILLERICA - GCI TRAINING FACILITY

Trade:

Sheet Metal

Sheet Metal 4 (Hands-On)

This course consists of 159 classroom hours covering the following areas: Massachusetts Uniform Sheet Metal Code; Trade Math III – Field Measuring; Comprehensive Plan and Specification Reading; Soldering; Architectural Sheet Metal; Louvers, Dampers and Access Doors; Fabrication IV – Comprehensive Review; and Hands-on Shop Fabrication.

September 3, 2024 – May 2025 – 5:00 – 9:00 PM – Tuesdays OR Thursdays*

ABC Member: $2,249.00 / Not Yet A Member: $2,667.00

Early Bird Pricing (6/17/24-7/1/24) – ABC Member: $2,074.00 / Not Yet A Member: $2,492.00

*Schedule Update: Night classes at our Billerica location will be held one night per week for 4 hours per night through the end of June 2025. We will also hold classes during February and April school vacations.

This will be a hands-on training course. The extra cost is for materials.

Locations:

BILLERICA - GCI TRAINING FACILITY

Trade:

Sheet Metal

Refrigeration Tech 3

This course consists of 120 classroom hours covering the following areas: Fasteners, Hardware, and Wiring Terminations; Control Circuit and Motor Troubleshooting; Troubleshooting Cooling; Troubleshooting Heat Pumps; Troubleshooting Gas Heating; Troubleshooting Oil Heating; Troubleshooting Accessories; Zoning Ductless, and Variable Refrigerant Flow Systems; Commercial Hydronic Systems; Steam Systems; Retail Refrigeration System; Customer Relations.

September 3, 2024 – May 2025
5:00 PM – 9:00 PM – Tuesdays*

ABC Member: $1,503.00 / Not Yet A Member: $1,999.00

Early Bird Pricing (6/17/24-7/1/24) – ABC Member: $1,328.00 / Not Yet A Member: $1,824.00

*Schedule Update: Night classes at our Billerica location will be held one night per week for 4 hours per night through the end of June 2025. We will also hold classes during February and April school vacations.

Locations:

BILLERICA - GCI TRAINING FACILITY

Trade:

Refrigeration

Turn to the Gould Construction Institute for high quality cost-effective training.

ELEVEN CONVENIENT LOCATIONS

       Andover | Billerica | Canton | Franklin    Manchester, NH | Medford | North Adams   Plymouth  |  Springfield | Taunton | Woburn

OR ONLINE

OUR PARTNERS

Wentworth Institute of Technology
Springfield Technical Community College
Penn Foster

READ MORE