Proud ally of:

TAUNTON – BRISTOL-PLYMOUTH REGIONAL TECHNICAL SCHOOL

207 Hart St, Taunton, MA 02780

 

Classes available for TAUNTON – BRISTOL-PLYMOUTH REGIONAL TECHNICAL SCHOOL

 

Plumbing Tier 5

This course consists of 120 classroom hours covering the following areas: Review of all sections of the Massachusetts State Plumbing Code 248 CMR 3.00, 248 CMR 10.00, and 248 CMR 11.00; Review of all sections of NFPA-54-2012, NFPA-58-2011, Massachusetts Fuel Gas Code 248 CMR 4.00, Amendments for NFPA-54-2012 248 CMR 5.00, Large Gas Utilization Equipment 248 CMR 7.00 and Amendments to NFPA 58-2011 248 CMR 8.00; Review of all plumbing related math covered in Tier I through Tier V; review of all sketches in Massachusetts State Plumbing Code Section 10.22 Figures; Business Related Costs.

September 3, 2025 – February 2026
5:00 – 8:00 PM -Wednesdays & Thursdays

Tuition: $1,661.00

Early Bird Pricing (6/3/25-6/17/25) – Tuition: $999.00

Effective for the 2025-2026 school year, all tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

Locations:

TAUNTON – BRISTOL-PLYMOUTH REGIONAL TECHNICAL SCHOOL

Trade:

Plumbing

Plumbing Tier 4

This course consists of 120 classroom hours covering the following areas: Business Principles for Plumbers; Fundamentals of Crew Leadership; Water Pressure Booster and Recirculation Systems; Indirect and Special Waste; Hydronic and Solar Heating Systems; Codes; Private Water Supply Well Systems; Private Waste-Disposal Systems; Swimming Pools and Hot Tubs; Plumbing for Mobile Homes and Travel Trailer Parks; Introduction to Medical Gas and Vacuum Systems.

November 18, 2024 – June 2025
5:00 – 8:00 PM – Mondays & Wednesdays

Tuition: $1,661.00

Early Bird Pricing (6/3/25-6/17/25) – Tuition: $999.00

Effective for the 2025-2026 school year, all tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

Locations:

TAUNTON – BRISTOL-PLYMOUTH REGIONAL TECHNICAL SCHOOL

Trade:

Plumbing

Pipefitting 3

This course consists of 159 classroom hours covering the following areas: Steam Traps; In-Line Specialties; Special Piping; Hot Taps; Introduction to Hydronic Systems; Commercial Hydronic Systems; Steam Systems; Water Treatment; Energy Conservation Equipment; ASME Piping Codes for HVAC, Power and Process Piping 7.5; Semiconductor/Hazardous Gas Piping Systems 12.5;  Biopharma Piping Systems 12.5; Orbital Welding Fabrication 15; Chemical/Corrosion Resistant Piping Systems 15; Compressed Air Piping Systems

September 3, 2025 – February 2026
5:00 – 8:00 PM – Mondays & Wednesdays

ABC Member: $2,206.00 / Not Yet A Member: $2,666.00

Early Bird Pricing (6/3/25-6/17/25) – ABC Member: $2,031.00 / Not Yet A Member: $2,491.00

Effective for the 2025-2026 school year, all tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

 

Locations:

TAUNTON – BRISTOL-PLYMOUTH REGIONAL TECHNICAL SCHOOL

Trade:

Pipefitting

Pipefitting 2

This course consists of 160 classroom hours covering the following areas: Basic Safety; Introduction to Construction Math; Introduction to Hand Tools; Introduction to Power Tools; Introduction to Construction Drawings; Basic Rigging; Basic Communication Skills; Basic Employability Skills; Introduction to Materials Handling; Orientation to the Trade; Pipefitting Hand Tools; Pipefitting Power Tools; Oxyfuel Cutting; Ladder & Scaffolds; Motorized Equipment; Piping Systems; Drawing & Detail Sheets; Identifying & Installing Valves; Pipefitting Trade Math; Threaded Pipe Fabrication; Socket Weld Pipe Fabrications & Butt Weld Pipe Fabrication; Excavations; Underground Pipe Installations; Rigging Equipment; Rigging Practices;  Standards & Specifications;  Advanced Trade Math; Motorized Equipment II; Introduction to Aboveground Pipe Installations; Field Routing & Vessel Trim; Pipe Hangers & Supports; Testing Piping Systems & Equipment; Advanced Blueprint Reading; Advanced Pipe Fabrication; Stress Relieving & Aligning; Maintaining Valves; Introduction to Supervisory Roles

September 2, 2025 – May 2026
5:00 – 8:00 PM – Tuesdays & Thursdays

ABC Member: $2,206.00 / Not Yet A Member: $2,666.00

Early Bird Pricing (6/3/25-6/17/25) – ABC Member: $2,031.00 / Not Yet A Member: $2,491.00

Effective for the 2025-2026 school year, all tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

Locations:

TAUNTON – BRISTOL-PLYMOUTH REGIONAL TECHNICAL SCHOOL

Trade:

Pipefitting

Sprinklerfitting 2

This course consists of 159 classroom hours covering the following areas: Hangers, Supports, Restraints, and Guides; General Purpose Valves; General Trade Math; Shop Drawings; Standard Spray Fire Sprinklers; Wet Fire Sprinkler Systems; Dry-Pipe Systems.

September 2, 2025 – May 2026

5:00 – 8:00pm – Tuesdays & Thursdays

ABC Member: $2,206.00 / Not Yet A Member: $2,666.00

Early Bird Pricing (6/3/25-6/17/25) – ABC Member: $2,031.00 / Not Yet A Member: $2,491.00

Effective for the 2025-2026 school year, all tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

Locations:

TAUNTON – BRISTOL-PLYMOUTH REGIONAL TECHNICAL SCHOOL

Trade:

Sprinkler & Gas Fitting

Sprinklerfitting 3

This course consists of 159 classroom hours covering the following areas: Deluge Preaction Systems; Standpipes; Water Supplies; Fire Pumps; Application-Specific Sprinklers and Nozzles.

September 3, 2025 – May 2026

5:00 – 8:00pm – Mondays & Wednesdays

ABC Member: $2,206.00 / Not Yet A Member: $2,666.00

Early Bird Pricing (6/3/25-6/17/25) – ABC Member: $2,031.00 / Not Yet A Member: $2,491.00

Effective for the 2025-2026 school year, all tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

Locations:

TAUNTON – BRISTOL-PLYMOUTH REGIONAL TECHNICAL SCHOOL

Trade:

Sprinkler & Gas Fitting

Sheet Metal 5 (Hands-On)

This course consists of 159 classroom hours covering the following areas: Trade Math – Estimating; Fume Exhaust Design; Introduction to Welding, Brazing and Cutting; Advanced Architectural Sheet Metal; Hands-on Shop Fabrication; and Exam Review and Preparation.

September 3, 2025 – May 2026
5:00 – 8:00 PM // Mondays & Wednesdays

ABC Member: $2,456.00 / Not Yet A Member: $2,916.00

Early Bird Pricing (6/3/25-6/17/25) – ABC Member: $2,281.00 / Not Yet A Member: $2,741.00

This will be a hands-on training course. The extra cost is for materials.

Locations:

TAUNTON – BRISTOL-PLYMOUTH REGIONAL TECHNICAL SCHOOL

Trade:

Sheet Metal

Sheet Metal 3 (Hands-On)

This course consists of 159 classroom hours covering the following areas: Trade Math II; Introduction to Supervisory Skills; Air Properties and Distribution; Principles of Airflow; Air Testing and Balancing; Fabrication III – Triangulation; Plans and Specifications; and Hands-on Shop Fabrication.

September 2, 2025 – May 2026
5:00 – 8:00 PM – Tuesdays & Thursdays

ABC Member: $2,456.00 / Not Yet A Member: $2,916.00

Early Bird Pricing (6/3/25-6/17/25) – ABC Member: $2,281.00 / Not Yet A Member: $2,741.00

Effective for the 2025-2026 school year, all tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.

Locations:

TAUNTON – BRISTOL-PLYMOUTH REGIONAL TECHNICAL SCHOOL

Trade:

Sheet Metal

Sheet Metal 2 (Hands-On)

This course consists of 159 classroom hours covering the following areas: Safety Review; Trade Math 104; Shop Production and Organization; Installation of Air Distribution Accessories; Air Systems; Duct Fabrication Standards; Introduction to Layout; Fabrication I – Parallel Line Development; Fabrication II – Radial Line Development; and Hands-on Shop Fabrication.

September 3, 2025 – May 2026
5:00 – 8:00 PM – Mondays & Wednesdays

ABC Member: $2,456.00 / Not Yet A Member: $2,916.00

Early Bird Pricing (6/3/25-6/17/25) – ABC Member: $2,281.00 / Not Yet A Member: $2,741.00

Effective for the 2025-2026 school year, all tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

Locations:

TAUNTON – BRISTOL-PLYMOUTH REGIONAL TECHNICAL SCHOOL

Trade:

Sheet Metal

Refrigeration Tech 3

This course consists of 159 classroom hours covering the following areas: Fasteners, Hardware, and Wiring Terminations; Control Circuit and Motor Troubleshooting; Troubleshooting Cooling; Troubleshooting Heat Pumps; Troubleshooting Gas Heating; Troubleshooting Oil Heating; Troubleshooting Accessories; Zoning Ductless, and Variable Refrigerant Flow Systems; Commercial Hydronic Systems; Steam Systems; Retail Refrigeration System; Customer Relations.

September 3, 2025 – May 2026
5:00 PM – 8:00 PM – Mondays & Wednesdays

ABC Member: $2,006.00 / Not Yet A Member: $2,466.00

Early Bird Pricing (6/3/25-6/17/25) – ABC Member: $2,031.00 / Not Yet A Member: $2,491.00

Effective for the 2025-2026 school year, all tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

Locations:

TAUNTON – BRISTOL-PLYMOUTH REGIONAL TECHNICAL SCHOOL

Trade:

Refrigeration

Sheet Metal 4 (Hands-On)

This course consists of 159 classroom hours covering the following areas: Massachusetts Uniform Sheet Metal Code; Trade Math III – Field Measuring; Comprehensive Plan and Specification Reading; Soldering; Architectural Sheet Metal; Louvers, Dampers and Access Doors; Fabrication IV – Comprehensive Review; and Hands-on Shop Fabrication.

September 2, 2025 – May 2026
5:00 – 8:00 PM – Tuesdays & Thursdays

ABC Member: $2,456.00 / Not Yet A Member: $2,916.00

Early Bird Pricing (6/3/25-6/17/25) – ABC Member: $2,281.00 / Not Yet A Member: $2,741.00

Effective for the 2025-2026 school year, all tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.

Locations:

TAUNTON – BRISTOL-PLYMOUTH REGIONAL TECHNICAL SCHOOL

Trade:

Sheet Metal

NINE CONVENIENT LOCATIONS

    Billerica | Canton | Manchester, NH      Medford | North Adams  | Plymouth    Springfield | Taunton | Woburn

OR ONLINE

OUR PARTNERS

Wentworth Institute of Technology
Springfield Technical Community College
Penn Foster

READ MORE

Turn to the Gould Construction Institute for high quality cost-effective training.