1 Armory St, Springfield, MA 01105
This course consists of 120 classroom hours covering the following areas: Review of all sections of the Massachusetts State Plumbing Code 248 CMR 3.00, 248 CMR 10.00, and 248 CMR 11.00; Review of all sections of NFPA-54-2012, NFPA-58-2011, Massachusetts Fuel Gas Code 248 CMR 4.00, Amendments for NFPA-54-2012 248 CMR 5.00, Large Gas Utilization Equipment 248 CMR 7.00 and Amendments to NFPA 58-2011 248 CMR 8.00; Review of all plumbing related math covered in Tier I through Tier V; review of all sketches in Massachusetts State Plumbing Code Section 10.22 Figures; Business Related Costs.
September 6, 2022 – May 2023
4:00 PM – 7:00 PM – Tuesdays & Thursdays
Tuition Price: $1,347.00
Early Bird Pricing June 20, 2022 – July 1, 2022:
Tuition: $1,172.00
Locations:
Trade:
This course consists of 120 classroom hours covering the following areas: Business Principles for Plumbers; Fundamentals of Crew Leadership; Water Pressure Booster and Recirculation Systems; Indirect and Special Waste; Hydronic and Solar Heating Systems; Codes; Private Water Supply Well Systems; Private Waste-Disposal Systems; Swimming Pools and Hot Tubs; Plumbing for Mobile Homes and Travel Trailer Parks; Introduction to Medical Gas and Vacuum Systems.
September 7, 2022 – May 2023
4:00 PM – 7:00 PM // Mondays & Wednesdays
Tuition Price: $1,347.00
Early Bird Pricing June 20, 2022 – July 1, 2022:
Tuition: $1,172.00
Locations:
Trade:
This course consists of 120 classroom hours covering the following areas: Applied Math; Sizing and Protecting the Water Supply System; Potable Water Supply Treatment; Types of Venting; Sizing DWV and Storm Systems; Sewage Pumps and Sump Pumps; Corrosive-Resistant Waste Piping; Compressed Air; Service Plumbing.
September 6, 2022 – May 2023
4:00 PM – 7:00 PM – Tuesdays & Thursdays
Tuition Price: $1,347.00
Early Bird Pricing June 20, 2022 – July 1, 2022:
Tuition: $1,172.00
Locations:
Trade:
This course consists of 120 classroom hours covering the following areas: Plumbing Math Two; Reading Commercial Drawings; Structural Penetrations, Insulation, and Fire-Stopping; Installing and Testing DWV Piping; Installing Roof, Floor, and Area Drains; Installing and Testing Water Supply Piping; Types of Valves; Installing Fixtures and Valves; Installing Water Heaters; Basic Electricity; Fuel Gas and Fuel Oil Systems.
September 6, 2022 – May 2023
4:00 PM – 7:00 PM – Tuesdays & Thursdays
Tuition Price: $1,347.00
Early Bird Pricing June 20, 2022 – July 1, 2022:
Tuition: $1,172.00
Locations:
Trade:
This course consists of 120 classroom hours covering the following areas: : Basic Safety; Introduction to Construction Math; Introduction to Hand Tools; Introduction to Power Tools; Introduction to Construction Drawings; Basic Rigging; Basic Communication Skills; Basic Employability Skills; Introduction to Materials Handling; Introduction to Plumbing; Plumbing Safety; Tools of the Plumbing Trade; Introduction to Plumbing Math; Introduction to Plumbing Drawings; Plastic Pipe and Fittings; Copper Tube and Fittings; Cast-Iron Pipe and Fittings; Carbon Steel Pipe and Fittings; Introduction to Plumbing Fixtures; Introduction to Drain, Waste, and Vent (DWV) Systems.
September 6, 2022 – May 2023
4:00 PM – 7:00 PM – Tuesdays & Thursdays
Tuition Price: $1,347.00
Early Bird Pricing June 20, 2022 – July 1, 2022:
Tuition: $1,172.00
Locations:
Trade:
This course consists of 159 classroom hours covering the following areas: Basic Safety; Introduction to Construction Math; Introduction to Hand Tools; Introduction to Power Tools; Introduction to Construction Drawings; Basic Rigging; Basic Communication Skills; Basic Employability Skills; Introduction to Materials Handling; Orientation to the Trade; Pipefitting Hand Tools; Pipefitting Power Tools; Oxyfuel Cutting; Ladder & Scaffolds; Motorized Equipment; Piping Systems; Drawing & Detail Sheets; Identifying & Installing Valves; Pipefitting Trade Math; Threaded Pipe Fabrication; Socket Weld Pipe Fabrications & Butt Weld Pipe Fabrication.
September 6, 2022 – May 2023
5:30 – 8:30 PM – Tuesdays & Thursdays
ABC Member: $1,784.00 / Not Yet a Member: $2,152.00
Early Bird Pricing June 20, 2022 – July 1, 2022:
ABC Member: $1,609.00 / Not Yet a Member: $1,977.00
Locations:
Trade:
This 159 hours Certified Program as per requirements contained in “237 CMR 22.02: Required Electrical Education as a Prerequisite for Master Electrician Examination” will focus the attention of the Eligible Candidate to the current testing edition of the National Electrical Code (NFPA 70-2020) with particular attention also given to the Commonwealth of Massachusetts Electrical Code Amendments (527 CMR 12:00) as contained in the current edition of the National Electrical Code (NFPA 70-2020) and other required documents and information required to sit for the test.
This course is intended to supplement the continuing studies of the serious Eligible Candidate, with emphasis on assisting the Eligible Candidate to pass the desired Commonwealth of Massachusetts, Certificate A (Master) Electrician License Examination. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.
September 7, 2022 – May 2023
5:30 PM – 8:30 PM Mondays & Wednesdays
Tuition Price: $1,726.00 + $265.00 optional book fee
Locations:
Trade:
This course consists of 168 classroom hours covering the following areas: Load Calculations –Feeders and Services; Health Care Facilities; Standby and Emergency Systems; Basic Electronic Theory; Fire Alarm Systems; Specialty Transformers; Advanced Controls; HVAC Controls; Heat Tracing and Freeze Protection; Motor Operation and Maintenance; Medium-Voltage Terminations/Splices; Special Locations; Fundamentals of Crew Leadership. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.
September 6, 2022 – May 2023
5:30 PM – 8:30 PM – Tuesdays & Thursdays
ABC Member: $1,784.00 // Not Yet A Member: $2,152.00
Early Bird Pricing June 20, 2022 – July 1, 2022:
ABC Member: $1,609.00 // Not Yet A Member: $1,977.00
Locations:
Trade:
This course consists of 168 classroom hours covering the following areas: Load Calculations – Branch and Feeder Circuits; Conductor Selection and Calculations; Practical Applications of Lighting; Hazardous Locations; Overcurrent Protection; Distribution Equipment; Transformers; Commercial Electrical Services; Motor Calculations; Voice, Data, and Video; Motor Controls. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.
September 6, 2022 – May 2023
5:30 PM – 8:30 PM – Tuesdays & Thursdays
ABC Member: $1,784.00 // Not Yet A Member: $2,152.00
Early Bird Pricing June 20, 2022 – July 1, 2022:
ABC Member: $1,609.00 // Not Yet A Member: $1,977.00
Locations:
Trade:
This course consists of 168 classroom hours covering the following areas: Alternating Current; Motors: Theory and Application; Electric Lighting; Conduit Bending; Pull and Junction Boxes; Conductor Installations; Cable Tray; Conductor Terminations and Splices; Grounding and Bonding; Circuit Breakers and Fuses; Control Systems and Fundamental Concepts. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.
September 6, 2022 – May 2023
5:30 PM – 8:30 PM – Tuesdays & Thursdays
ABC Member: $1,784.00 // Not Yet A Member: $2,152.00
Early Bird Pricing June 20, 2022 – July 1, 2022:
ABC Member: $1,609.00 // Not Yet A Member: $1,977.00
Locations:
Trade:
This course consists of 168 classroom hours covering the following areas: Basic Safety; Introduction to Construction Math; Introduction to Hand Tools; Introduction to Power Tools; Introduction to Construction Drawings; Basic Rigging; Basic Communication Skills; Basic Employability Skills; Introduction to Materials Handling; Orientation to the Electrical Trade; Electrical Safety; Introduction to Electrical Circuits; Electrical Theory; Introduction to the National Electrical Code (NEC); Device Boxes; Hand Bending; Raceways and Fittings; Conductors and Cables; Basic Electrical Construction Drawings; Residential Electrical Services; Electrical Test Equipment. It is required that all students bring a copy of the National Electrical Code, 2020 Edition, with the Commonwealth of Massachusetts Amendments (527 CMR 12.00) to class.
September 6, 2022 – May 2023
5:30 PM – 8:30 PM – Tuesdays & Thursdays
ABC Member: $1,784.00 // Not Yet A Member: $2,152.00
Early Bird Pricing June 20, 2022 – July 1, 2022:
ABC Member: $1,609.00 // Not Yet A Member: $1,977.00
Locations:
Trade:
Turn to the Gould Construction Institute for high quality cost-effective training.