Sheet Metal

This course consists of 152 classroom hours covering the following areas: Safety Review; Trade Math 104; Shop Production and Organization; Installation of Air Distribution Accessories; Air Systems; Duct Fabrication Standards; Introduction to Layout; Fabrication I – Parallel Line Development; Fabrication II – Radial Line Development; and Hands-on Shop Fabrication.

Begins September 18, 2026 – 7:30AM – 3:30 PM – Every other Friday

ABC Member: $2,757.00 / Not Yet A Member: $3,268.00

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.

This course consists of 152 classroom hours covering the following areas: Trade Math – Estimating; Fume Exhaust Design; Introduction to Welding, Brazing and Cutting; Advanced Architectural Sheet Metal; Hands-on Shop Fabrication; and Exam Review and Preparation.

Begins January 2027 – 5:00 – 9:00 PM – Mondays & Wednesdays

ABC Member: $2,757.00 / Not Yet A Member: $3,268.00

*Schedule Update: Sheet Metal classes at our Billerica location will be held two nights per week for 4 hours per night with a shop sessions being scheduled on some Saturdays throughout the course. We will also hold classes during February and April school vacations.

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.

This course consists of 152 classroom hours covering the following areas: Massachusetts Uniform Sheet Metal Code; Trade Math III – Field Measuring; Comprehensive Plan and Specification Reading; Soldering; Architectural Sheet Metal; Louvers, Dampers and Access Doors; Fabrication IV – Comprehensive Review; and Hands-on Shop Fabrication.

Begins January 2027 – 5:00 – 9:00 PM

ABC Member: $2,757.00 / Not Yet A Member: $3,268.00

*Schedule Update: Sheet Metal classes at our Billerica location will be held two nights per week for 4 hours per night with a shop sessions being scheduled on some Saturdays throughout the course. We will also hold classes during February and April school vacations.

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.

This course consists of 152 classroom hours covering the following areas: Trade Math II; Introduction to Supervisory Skills; Air Properties and Distribution; Principles of Airflow; Air Testing and Balancing; Fabrication III – Triangulation; Plans and Specifications; and Hands-on Shop Fabrication.

Begins January 2027 – 5:00 – 9:00 PM

ABC Member: $2,757.00 / Not Yet A Member: $3,268.00

*Schedule Update: Sheet Metal classes at our Billerica location will be held two nights per week for 4 hours per night with a shop sessions being scheduled on some Saturdays throughout the course. We will also hold classes during February and April school vacations.

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.

This course consists of 152 classroom hours covering the following areas: Safety Review; Trade Math 104; Shop Production and Organization; Installation of Air Distribution Accessories; Air Systems; Duct Fabrication Standards; Introduction to Layout; Fabrication I – Parallel Line Development; Fabrication II – Radial Line Development; and Hands-on Shop Fabrication.

Begins January 2027 – 5:00 – 9:00 PM

ABC Member: $2,757.00 / Not Yet A Member: $3,268.00

*Schedule Update: Sheet Metal classes at our Billerica location will be held two nights per week for 4 hours per night with a shop sessions being scheduled on some Saturdays throughout the course. We will also hold classes during February and April school vacations.

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.

This course consists of 152 classroom hours covering the following areas: Introduction to Sheet Metal; Basic Safety; Introduction to Hand Tools; Introduction to Power Tools; Introduction to B.G.L. c 112 s 237-251 and 271 CMR; Basic Rigging; Introduction to Materials Handling; Basic Communication Skills; Basic Employability Skills; Introduction to Construction Math; Introduction to Construction Drawings; Tools of the Trade; Installation of Ductwork.

Begins January 2027 – 5:00 – 9:00 PM

ABC Member: $2,507.00 / Not Yet A Member: $3,036.00

*Schedule Update: Sheet Metal classes at our Billerica location will be held two nights per week for 4 hours per night with a shop sessions being scheduled on some Saturdays throughout the course. We will also hold classes during February and April school vacations.

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This course consists of 152 classroom hours covering the following areas: Trade Math – Estimating; Fume Exhaust Design; Introduction to Welding, Brazing and Cutting; Advanced Architectural Sheet Metal; Hands-on Shop Fabrication; and Exam Review and Preparation.

September 9, 2026 – 5:00 – 9:00 PM – Mondays & Wednesdays

ABC Member: $2,757.00 / Not Yet A Member: $3,268.00

*Schedule Update: Sheet Metal classes at our Billerica location will be held two nights per week for 4 hours per night with a shop sessions being scheduled on some Saturdays throughout the course. We will also hold classes during February and April school vacations.

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.

Though this course is held in New Hampshire, the curriculum is for a Massachusetts Journeyman License.

This course consists of 159 classroom hours covering the following areas: Trade Math II; Introduction to Supervisory Skills; Air Properties and Distribution; Principles of Airflow; Air Testing and Balancing; Fabrication III – Triangulation; Plans and Specifications; and Hands-on Shop Fabrication.

Begins September 8, 2026 – 5:30 PM – 8:30 PM – Tuesdays & Thursdays

ABC Member: $2,757.00 / Not Yet A Member: $2,916.00

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.

This course consists of 159 classroom hours covering the following areas: Trade Math – Estimating; Fume Exhaust Design; Introduction to Welding, Brazing and Cutting; Advanced Architectural Sheet Metal; Hands-on Shop Fabrication; and Exam Review and Preparation.

September 8, 2026 – 5:00 – 8:00 PM // Tuesdays & Thursdays

ABC Member: $2,757.00 / Not Yet A Member: $3,286.00

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.

This course consists of 159 classroom hours covering the following areas: Trade Math II; Introduction to Supervisory Skills; Air Properties and Distribution; Principles of Airflow; Air Testing and Balancing; Fabrication III – Triangulation; Plans and Specifications; and Hands-on Shop Fabrication.

September 8, 2026 – 5:00 – 8:00 PM – Tuesdays & Thursdays

ABC Member: $2,757.00 / Not Yet A Member: $3,286.00

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.

This course consists of 159 classroom hours covering the following areas: Massachusetts Uniform Sheet Metal Code; Trade Math III – Field Measuring; Comprehensive Plan and Specification Reading; Soldering; Architectural Sheet Metal; Louvers, Dampers and Access Doors; Fabrication IV – Comprehensive Review; and Hands-on Shop Fabrication.

September 9, 2026 – 5:30 – 8:30 PM // Mondays & Wednesdays

Tuition: $2,212.00

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.

This course consists of 159 classroom hours covering the following areas: Massachusetts Uniform Sheet Metal Code; Trade Math III – Field Measuring; Comprehensive Plan and Specification Reading; Soldering; Architectural Sheet Metal; Louvers, Dampers and Access Doors; Fabrication IV – Comprehensive Review; and Hands-on Shop Fabrication.

September 3, 2025 – May 2026
5:30 – 8:30 PM // Mondays & Wednesdays

ABC Member: $2,456.00 / Not Yet A Member: $2,916.00

Early Bird Pricing (6/3/25-6/17/25) – ABC Member: $2,281.00 / Not Yet A Member: $2,741.00

Effective for the 2025-2026 school year, all tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.

Though this course is held in New Hampshire, the curriculum is for a Massachusetts Journeyman License.

This course consists of 159 classroom hours covering the following areas: Safety Review; Trade Math 104; Shop Production and Organization; Installation of Air Distribution Accessories; Air Systems; Duct Fabrication Standards; Introduction to Layout; Fabrication I – Parallel Line Development; Fabrication II – Radial Line Development; and Hands-on Shop Fabrication.

Begins September 9, 2026 – 5:30 PM – 8:30 PM – Mondays & Wednesdays

ABC Member: $2,757.00 / Not Yet A Member: $3,268.00

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.

This course consists of 159 classroom hours covering the following areas: Introduction to Sheet Metal; Basic Safety; Introduction to Hand Tools; Introduction to Power Tools; Introduction to B.G.L. c 112 s 237-251 and 271 CMR; Basic Rigging; Introduction to Materials Handling; Basic Communication Skills; Basic Employability Skills; Introduction to Construction Math; Introduction to Construction Drawings; Tools of the Trade; Installation of Ductwork.

September 8, 2026 – 5:00 – 8:00 PM – Tuesdays & Thursdays

ABC Member: $2,507.00 / Not Yet A Member: $3,036.00

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This course consists of 159 classroom hours covering the following areas: Safety Review; Trade Math 104; Shop Production and Organization; Installation of Air Distribution Accessories; Air Systems; Duct Fabrication Standards; Introduction to Layout; Fabrication I – Parallel Line Development; Fabrication II – Radial Line Development; and Hands-on Shop Fabrication.

September 8, 2026 – 5:00 – 8:00 PM – Tuesdays & Thursdays

ABC Member: $2,757.00 / Not Yet A Member: $3,286.00

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This course consists of 152 classroom hours covering the following areas: Introduction to Sheet Metal; Basic Safety; Introduction to Hand Tools; Introduction to Power Tools; Introduction to B.G.L. c 112 s 237-251 and 271 CMR; Basic Rigging; Introduction to Materials Handling; Basic Communication Skills; Basic Employability Skills; Introduction to Construction Math; Introduction to Construction Drawings; Tools of the Trade; Installation of Ductwork.

Begins September 9, 2026 – 5:00 – 9:00 PM – Mondays & Wednesdays

ABC Member: $2,507.00 / Not Yet A Member: $3,036.00

*Schedule Update: Sheet Metal classes at our Billerica location will be held two nights per week for 4 hours per night with a shop sessions being scheduled on some Saturdays throughout the course. We will also hold classes during February and April school vacations.

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This course consists of 152 classroom hours covering the following areas: Safety Review; Trade Math 104; Shop Production and Organization; Installation of Air Distribution Accessories; Air Systems; Duct Fabrication Standards; Introduction to Layout; Fabrication I – Parallel Line Development; Fabrication II – Radial Line Development; and Hands-on Shop Fabrication.

Begins September 8, 2026 – 5:00 – 9:00 PM – Tuesdays & Thursdays

ABC Member: $2,757.00 / Not Yet A Member: $3,268.00

*Schedule Update: Sheet Metal classes at our Billerica location will be held two nights per week for 4 hours per night with a shop sessions being scheduled on some Saturdays throughout the course. We will also hold classes during February and April school vacations.

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.

This course consists of 152 classroom hours covering the following areas: Trade Math II; Introduction to Supervisory Skills; Air Properties and Distribution; Principles of Airflow; Air Testing and Balancing; Fabrication III – Triangulation; Plans and Specifications; and Hands-on Shop Fabrication.

Begins September 9, 2026 – 5:00 – 9:00 PM – Mondays & Wednesdays

ABC Member: $2,757.00 / Not Yet A Member: $3,268.00

*Schedule Update: Sheet Metal classes at our Billerica location will be held two nights per week for 4 hours per night with a shop sessions being scheduled on some Saturdays throughout the course. We will also hold classes during February and April school vacations.

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.

This course consists of 152 classroom hours covering the following areas: Trade Math – Estimating; Fume Exhaust Design; Introduction to Welding, Brazing and Cutting; Advanced Architectural Sheet Metal; Hands-on Shop Fabrication; and Exam Review and Preparation.

September 9, 2026 – 5:30 – 8:30 PM – Mondays & Wednesdays

ABC Member: $2,757.00 / Not Yet A Member: $3,268.00

*Schedule Update: Sheet Metal classes at our Billerica location will be held two nights per week for 4 hours per night with a shop sessions being scheduled on some Saturdays throughout the course. We will also hold classes during February and April school vacations.

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.

This course consists of 152 classroom hours covering the following areas: Massachusetts Uniform Sheet Metal Code; Trade Math III – Field Measuring; Comprehensive Plan and Specification Reading; Soldering; Architectural Sheet Metal; Louvers, Dampers and Access Doors; Fabrication IV – Comprehensive Review; and Hands-on Shop Fabrication.

Begins September 8, 2026 – 5:00 – 9:00 PM – Tuesdays & Thursdays

ABC Member: $2,757.00 / Not Yet A Member: $3,268.00

*Schedule Update: Sheet Metal classes at our Billerica location will be held two nights per week for 4 hours per night with a shop sessions being scheduled on some Saturdays throughout the course. We will also hold classes during February and April school vacations.

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.

This course consists of 159 classroom hours covering the following areas: Massachusetts Uniform Sheet Metal Code; Trade Math III – Field Measuring; Comprehensive Plan and Specification Reading; Soldering; Architectural Sheet Metal; Louvers, Dampers and Access Doors; Fabrication IV – Comprehensive Review; and Hands-on Shop Fabrication.

September 8, 2026 – 5:00 – 8:00 PM // Tuesdays & Thursdays

ABC Member: $2,757.00 / Not Yet A Member: $3,286.00

Note: All tuition must be paid in full at the time of registration in order to guarantee your student’s place in their selected class. With limited space available, our classes tend to fill up quickly, so we strongly encourage you to plan ahead and ensure that tuition is paid on time.

This will be a hands-on training course. The extra cost is for materials.